Guarantee; Disposal - Dometic WAECO SinePower MSP 162 Instructions De Montage Et De Service

SinePower
The status LED (fig. 1 2, page 3) displays the following conditions:
Display
Green, constantly lit
Red, quickly flashing
Red, slowly flashing
Red, occasionally flashing
Red, constant light
11

Guarantee

The statutory warranty period applies. If the product is defective, please
contact the manufacturer's branch in your country (see the back of the
instruction manual for the addresses) or your retailer.
For repair and guarantee processing, please include the following docu-
ments when you send in the device:
A copy of the receipt with purchasing date
A reason for the claim or description of the fault
12

Disposal

➤ Place the packaging material in the appropriate recycling waste bins
wherever possible.
If you wish to finally dispose of the product, ask your local recycling
M
centre or specialist dealer for details about how to do this in
accordance with the applicable disposal regulations.
EN
Cause
The device is functioning.
Input voltage is too high.
The input voltage is too low.
Overheating
Short circuit or electrical
wiring error
Excessive load
Guarantee
Remedy
–
Check the input voltage.
Reduce the input voltage.
Charge the battery.
Check cables and contacts.
Ensure better ventilation.
Make certain that the ventila-
tion slots are not covered.
Lower the ambient tempera-
ture.
Check electrical wiring.
Reduce the load.
31