Operating The Device Safely; Scope Of Delivery - Dometic SINEPOWER DSP 612 Instructions De Montage

SinePower
• Fasten the cables securely.
• Do not pull on the cables.
2.5

Operating the device safely

D
DANGER! Danger of electrocution
• Do not touch exposed cables with your bare hands.
!
WARNING!
• Only use the device in closed, well-ventilated rooms.
!
CAUTION!
• Do not operate the device
– In salty, wet or damp environments
– In the vicinity of corrosive fumes
– In the vicinity of combustible materials
– In areas where there is a danger of explosions.
• Before starting the device, ensure that the power supply line and the
plug are dry.
• Always disconnect the power supply when working on the device.
• Please observe that parts of the device may still conduct voltage even
if the fuse has blown.
• Do not disconnect any cables when the device is still in use.
A
NOTICE!
• Make sure the air inlets and outlets of the device are not covered.
• Ensure good ventilation.
3

Scope of delivery

No. in
Designation
fig. 1
1 Sine wave inverter
2 Remote control
3 Connection cable remote control
– Operating manual
EN
Scope of delivery
7