Maintaining And Cleaning The Charging Converter - Dometic PERFECTPOWER DCC1224-10 Instructions De Montage Et De Service

Maintaining and cleaning the charging converter

Set eStore mode (DCC1212-40 only and DCC2412-40 with optional
eStore battery)
You can set the eStore charging mode using the S7 DIP switch.
S7
ON
OFF
For the eStore charging characteristic, a temperature sensor must be connected.
I
NOTE
When used without a temperature sensor, the eStore charging mode is
constant at 13.8 V with a maximum of 35 A.
The eStore charging mode has the following charging characteristics:
Output voltage
(Charging end voltage):
Output current
(Charging current):
11 Maintaining and cleaning the charging
converter
A
NOTICE! Risk of damage to the device!
Never clean the device under running water or in dish water.
Do not use abrasive cleaning agents or hard objects during cleaning as
these can damage the appliance.
➤ Occasionally clean the device with a damp cloth.
22
eStore charging characteristic
OFF
ON
13.8 Vg
< –10 °C
< –10 °C bis 0 °C
> 0 °C
PerfectCharge
0 A
5 A
35 A
EN