Securing Your Child; Harness Mode - Britax One4Life Clicktight Guide D'utilisation

9 Child restraint is in recline position "B".
9 Child restraint is in a vehicle seat that has a lap-shoulder belt.
9 All connections are secure and strap is not twisted.
9 Car seat base MUST be flat on vehicle seat and MUST be parallel to
vehicle seat.
9 That any excess top tether webbing is contained within your vehicle and
secured.
9 If your vehicle seat back is adjustable, ensure it is in the upright position
before placing the child seat on the vehicle seat.
NOTE:
• If the child restraint does not meet the above criteria,
repeat the installation steps or use a different seating
location in your vehicle. Ensure that the LUAS system
does not interfere with the vehicle belt function and
alignment when securing your child.
• Please see section Securing Your Child in
Mode on page 36 to properly secure your child.

Securing Your Child

Harness Mode

1. Make the proper
adjustments to the harness
and buckle (page 12).
2. Loosen the harness. Press
the harness release button
(A) and pull both harness
straps forward (B).
ADJUSTMENT
SLOT
BOOSTER
B
A
35