Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 33

7. Route the lap vehicle belt
through the FORWARD-
facing belt path marked by
green labels.
8. Ensure the belt is not
twisted and fasten the seat
belt.
9. Push down into the middle
of the child restraint
with moderate force
(approximately 20.5
kg/45 lb), compressing
the vehicle seat while
tightening the vehicle belt.
NOTE: Make sure the
vehicle belt is locked as
directed by your vehicle
owner's manual.
10. Close the CLICKTIGHT
over the vehicle seat belt.
11. Ensure both CLICKTIGHT
release buttons are visible.
NOTE: If it is difficult to close,
you may have removed too
much slack.
12. Connect the top tether hook
to the vehicle's top tether
anchor (check the vehicle
owner's manual for location).
13. Pull the top tether strap to
remove slack and secure
excess webbing with the
elastic band attached.
CLICK
31