Upper Body Support Pillow; Lower Infant Insert; Headrest Cover; Cup Holders - Britax One4Life Clicktight Guide D'utilisation

BOOSTER MODE INSTALLATION
Push the recline button on
either side of the base and
rotate the child restraint to
position "B". Recline indicator
does not need to be used in
BOOSTER mode.
IMPORTANT:
be in position "B" when seat
is used in BOOSTER

Upper Body Support Pillow

The provided upper body support
pillow (Figure 1) is designed to
provide better fit and comfort for
infants using this child seat. The
upper body support pillow MUST
be removed for children weighing
over 9.1 kg (20 lbs) or in a forward-
facing position.

Lower Infant Insert

IMPORTANT:
insert (Figure 2) MUST be used for
children weighing 10 kg (22 lbs) or
less in a rear-facing position. Do
not use with a child weighing more
than 10 kg (22 lbs) or in a forward-
facing position. If cleaning, see
page 45.

Headrest Cover

The headrest cover must be
unfolded for infants weighing
9.1 kg (20 lbs) or more.

Cup Holders

The cup holders are removable
and dishwasher safe.
• To remove, grasp the top lip,
twist 90 degrees and pull up
and away from the seat.
• To insert, line up the tabs on
the cup holder to the slots on
the seat, and insert inside.
Twist 90 degrees.
16
Reclining the Seat in
Recline MUST
mode.
The lower infant
BOOSTER Mode
B
B
Figure 1
Figure 2