Britax ONE4LIFE CLICKTIGHT Guide D'utilisation page 35

1. Refer to page 38 to
convert from harness to
BOOSTER
2. Adjust the child restraint to
position "B" by pushing the
red recline button on either
side of the base.
3. Open the CLICKTIGHT.
Squeeze the CLICKTIGHT
release buttons underneath
the front cover flap and lift
to open.
4. For models WITH storage
pouch only: Open the
storage pouch.
Remove the lower
connectors by pressing
the spring tab, pushing
the connector back while
rotating down and forward
off the anchor point.
5. Extend lower connector
strap to its longest length
by pressing the grey button
on adjuster.
6. Place child restraint on
the vehicle seat so that the
car seat base is flat on the
vehicle seat and is parallel to
vehicle seat.
NOTE: If your vehicle seat
back is adjustable, ensure
it is in the upright position
before placing the child seat
on the vehicle seat.
7. Ensure the base does not
hang over front edge of
vehicle seat.
mode.
B
B
With storage
storage pouch
pouch
(Select Models)
Without
33