Attaching The Backrest; Adjusting The Headrest & Backrest - Diono monterey 4DXT Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

ATTACHING THE BACKREST

1.
With seat lying flat on the floor, tuck in fabric
panel at rear of seat. Place hooks at seat bottom
as shown.
2.
Attach the backrest hooks to seat mounting
points.
3.
Push down on seatback just above hooks until
fully engaged.
4.
Rotate seatback to an upright position while
maintaining pressure just above the hooks.
8
01827 310557
ADJUSTING THE HEADREST
Squeeze the red adjuster on back of booster seat
headrest while adjusting its height up or down to fit
the child.
1
ADJUSTING BACKREST WIDTH
This booster seat features a unique, width-adjusting
seat back to best fit a growing child as well as sea-
2
sonal clothing.
Turn the dial on the back of the backrest to adjust its
width: turn clockwise to increase backrest width; turn counter-clock-
wise to make backrest narrower.
SUGGESTION:
3
to securing the booster seat installation using FIX.
4
ADJUSTING THE HEADREST & BACKREST
It may be easier to adjust backrest to proper width prior
diono.com
9

Publicité

Table des Matières
loading

Table des Matières