Attaching The Backrest; Adjusting The Headrest & Backrest - Diono monterey 2 CXT Mode D'emploi

ATTACHING THE BACKREST

1. With seat lying flat on the floor, tuck in fabric panel at rear of seat.
Place hooks at seat bottom as shown.
2. Attach the backrest hooks to seat mounting points.
3. Push down on seatback just above hooks until fully engaged.
1
4. Rotate seatback to an upright position while maintaining pressure
just above the hooks.
5. Fasten screws tightly for permanent attachment.
4
8
01827 310557
2 3
5
ADJUSTING THE HEADREST & BACKREST
ADJUSTING THE HEADREST
Squeeze the red adjuster on back of booster seat
headrest while adjusting its height up or down to fit
the child.
ADJUSTING BACKREST WIDTH
This booster seat features a unique, width-adjusting
seat back to best fit a growing child as well as
seasonal clothing.
Turn the dial on the back of the backrest to adjust
its width: turn clockwise to increase backrest width;
turn counter-clockwise to make backrest narrower.
SUGGESTION: It may be easier to adjust backrest to proper width prior
to securing the booster seat installation using FIX.
diono.com
9