Machine Packaging; Preliminary Operations; Using The Machine For The First Time - Philips Saeco Spidem My Coffee Mode D'emploi

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

KEY TO MACHINE COMPONENTS - INSTALLATION
Key to Machine Components
Coffee bean hopper with cover
Service door
Coffee grounds drawer
Dispensing spout (height-adjustable)
Drip tray + grill
Control panel
Hot water / steam wand with Pannarello frother
Water Tank
Power cord
Hot water / steam knob
Cup stacking surface
Drip tray
Brew group
Control panel
Small coffee brew button
Long coffee brew button
Steam button
Power button
Aroma button
Digital display
Accessories
Grinder adjustment key
Brew group lubricant
4
INSTALLATION
For your own safety and the safety of others, carefully
follow the "Safety Regulations" in section 3.
4.1

Machine Packaging

The original packaging has been designed and con-
structed to protect the machine during transport.
We recommend keeping the original packaging for pos-
sible future transportation.
4.2

Preliminary Operations

• Remove the drip tray (5) with grill from the packag-
ing.
• Remove the coffee machine from the packaging
and position it in a proper place in compliance with
the requirements described in the safety regulations
(section 3).
• (Fig.15) - Place the drip tray (5) into the machine.
• Before plugging the machine into the socket, be
sure that all steps outlined in section 4.3 have been
completed.
Important Note: Carefully read the expla-
nations of all the warnings the machine
displays to the user on the control panel display
(section 12).
4.3

Using the Machine for the First Time

• (Fig.3) - Lift the water tank (8) slightly and remove it
from its seat.
• (Fig.4) - Rinse and fi ll it with fresh water taking care
not to overfi ll it. Replace the water tank.
Always use only fresh, non-sparkling water to
fi ll the tank (8). Hot water or any other liquid
may damage the tank and/or the machine. Do not turn
on the machine with empty tank: make sure there is
enough water in the tank.
• (Fig.1) - Remove the cover from the coffee bean hop-
per (1).
• (Fig.2) - Pour in coffee beans.
Note: The grill on top of the coffee bean
hopper can not and does not need to be
removed.
Always add only coffee beans in the coffee
bean hopper (1). Pre-ground coffee, instant
11

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

035dr

Table des Matières