Minimum Mantel Clearances; Logo Placement - Napoleon Gss36Cfe Manuel D'installation Et D'utilisation

fi nishing
EN
WARNING
!
• Risk of fi re! Maintain all specifi ed air space clearances to combustibles. Failure to comply with these
instructions may cause a fi re or cause the appliance to overheat. Ensure all clearances (i.e. back, side, top,
vent, mantel, front, etc.) are clearly maintaned.
• Never obstruct the front opening of the appliance.
• When using paint or lacquer to fi nish the mantel, the paint or lacquer must be heat resistant to prevent
discolouration.
9.3

minimum mantel clearances

We recommend all mantels be made from non-combustible material. However, if using combustible materials,
follow the chart below.
MANTEL
HEIGHT
note:
Mantel temperatures will rise above normal temperatures and may be hot to touch.
9.4

logo placement

Remove the backing of the logo supplied. Centre the
logo on the front of the appliance and ½" (12.7mm) in
from the left side, as shown.
28
W415-2978 / 02.16.21
20 1/2
18 1/2
16 1/2
14 1/2
8
2 4 6 8 10
MANTEL
DEPTH
½"
(12.7mm)
½"
(12.7mm)
MANTEL
8"
6"
4"
2"
1"
TOP OF
APPLIANCE
35 3/4"
½"
(12.7mm)
½"
(12.7mm)