Removing And Installing The Grease Filters; Removing And Installing The Metal-Mesh Grease Filters - Gaggenau AI 400720 Mode D'emploi Et Notice De Montage

Cleaning the glass plates
•
Apply commercially available window cleaning
agent with a soft, moist cloth.
•
To facilitate cleaning, you can detach the glass
plates as follows:
Detach the grease filters. In the extractor hood,
you will find three openings on the upper side
through which you can lift the glass plates
singly with a blunt object (e.g. handle of a
wooden spoon) to detach them with greater
ease.
•
If they are extremely soiled, the glass plates
can be cleaned in a dishwasher at a maximum
temperature of 131 °F.
Note: when putting the glass plates back in place,
make sure that you do not scratch the chimney.
Replace the glass plates with the printed side
facing down. Position the glass plates at the
chimney side first.
Removing and installing the grease
filter
RISK OF INJURY
Before removing and installing the grease filters,
always follow the instructions and warnings in the
chapter entitled "Safety instructions"!
Removing and installing the metal-mesh grease
filters
1 Open the lock and fold down the grease filters.
In doing so, hold the underside of the grease
filters with your other hand.
(for appliances with edge extraction)
2 Clean the grease filters.
3 Reinsert the cleaned grease filters.
13