Special Functions - Gaggenau AI 400720 Mode D'emploi Et Notice De Montage

Special functions

Intensive time:
•
You can set the intensive level running time to
3, 5 or 10 minutes by simultaneously pressing
the Int key and the 1, 2 or 3 key and you can
store this setting. When delivered, the
appliance is set to five minutes, i.e. the
combination of the Int key and the key 2.
Fan follow-on:
•
Delayed shut-off is possible at any level. First
press the required key 1, 2, 3 or Int and then
press the key.
The delayed shut-off time for all levels is ten
minu-tes. After these ten minutes, the
ventilation switches off, but the lighting stays
on.
Interval ventilation:
•
Interval ventilation is a special feature of this
appliance which periodically activates the fan
for five minutes every hour. You can activate
this function by simultaneously pressing the 0
key and, depending on the required extraction
capacity, the 1, 2 or 3 key.
This mode of operation is indicated by
alternating illumination of the
with the corresponding fan level indicator.
You can switch off interval ventilation by
pressing the 0 key.
Lighting:
•
Briefly press the
on and off.
•
The light can be switched on at any time, even
though the fan is switched off.
•
Adjusting the brightness:
Hold down the
brightness is obtained.
Saturation indicator: F
•
The grease filter saturation display F flashes
after an operating time of 30 hours to indicate
that you should clean the grease filter. The
grease filters can of course be cleaned at any
time, even if the grease filter saturation display
has not started to flash.
•
To cancel the display, press the F button.
key together
button to switch the light
button until the desired
11