Removing And Installing The Metal Grease Filter - Gaggenau AL 400 Notice D'utilisation

In the dishwasher:
Note: Slight discoloration is possible when cleaning
the dishwasher. This does not affect the metal grease
filter's functioning.
▯
Do not clean extremely dirty metal grease filters
with dishes.
▯
Loosely position the metal grease filter in the
dishwasher. The metal grease filters must not be
jammed in.
By hand:
Note: You can use a special grease solvent if soiling
is stubborn. You can order it via the online shop.
▯
Soak the metal grease filters in hot soapy
solution.
▯
Use a brush for cleaning and then rinse the filters
well.
▯
Allow the metal grease filters to drip dry.
Removing and installing the metal
grease filter
Open the filter cover
1 Grip filter cover in the middle and pull upward.
All manuals and user guides at all-guides.com
2
Uninstalling metal grease filter
1
2
3
Clean the grease troughs
For better cleaning, it is possible to remove the
grease troughs. The grease troughs can be cleaned in
the dishwasher.
1
2
3
Fold the filter cover forward.
Open the lock and fold the metal mesh grease
filter forward.
Take metal mesh grease filter out of the holder.
Notes
‒ Grease can accumulate in the bottom of the
metal mesh grease filter.
‒ Do not hold metal mesh grease filter at an
angle, otherwise grease will drip out.
Clean the metal mesh grease filter.
Remove the grease troughs.
Clean the grease troughs.
Insert the grease troughs again.
13