Troubleshooting; Troubleshooting Table - Gaggenau AL 400 Notice D'utilisation

Installing metal grease filter
1 Insert metal mesh grease filter.
2 Fold metal mesh grease filter back in and snap
the lock in.
3 Reset the saturation display by pressing the
button.
The saturation display
Close the filter cover
Grip filter cover in the middle and fold up.
The filter cover snaps in.
Clean the filter cover
For better cleaning, you can remove the filter cover.
1 Open the filter cover.
2 Grip the filter cover on the side with both hands.
3 Lift up the rear portion to the stop and pull the
filter cover forward.
The filter cover can be pulled using the bolts of
the holder.
4 Clean the filter cover
Hook in the filter cover
1 Grip the filter cover on the side with both hands.
2 Push the filter cover onto the bolts of the holder
and lift up in the front until it snaps in.
14
All manuals and user guides at all-guides.com
œ
œ
goes out.

Troubleshooting

You can often easily eliminate problems that may
occur on your own. Before calling customer service,
take into account the following information.
9
WARNING
Risk of electric shock
Improper repairs are dangerous. Only an after-
sales technician trained by us may perform
repairs and may replace damaged connecting
leads. Remove the mains plug or deactivate the
fuse in the fuse box if the appliance is defective.
Call after-sales service.
LED lights
Defective LED lights may be replaced by the
manufacturer, his customer service or a qualified
technician (electrician) only.

Troubleshooting table

Disruption Possible cause Solution
Appliance is Plug is not
not working plugged in
Power outage
Fuse defective
Appliance does Filter cover not
not retract. closed.
The button illu- The control unit
mination does is faulty.
not work.
The lighting The bulbs are
does not work. faulty.
œ
The filter is
The button
soiled.
flashes.
--------
Connect the appliance
to the mains
Check whether other
kitchen appliances are
working
Check in the fuse box
whether the fuse for the
appliance is in working
order
Close filter cover com-
pletely.
Call customer service.
Call customer service.
Clean the filter, see the
Cleaning
chapter about
and maintenance
.