Service Schedule; Handover Confirmation; Service Confirmation - Stihl Rm 545 Manuel D'utilisation

Fault:
Poor cut, lawn turning yellow
Possible cause:
– Blade is blunt or worn.
– Mowing speed is too high in relation to
cutting height.
Remedy:
– Sharpen or replace blade (
( 12.4),
– Reduce mowing speed and/or select
correct cutting height (do not work at
lowest cutting height). (
Fault:
Engine overheating.
Possible cause:
– Oil level in engine too low.
– Cooling ribs dirty.
Remedy:
– Change engine oil. ( 7.6)
– Clean cooling ribs. ( 12.2)
Fault:
No drive when self-propulsion lever is
actuated.
Possible cause:
– Self-propulsion cable incorrectly
adjusted.
– Self-propulsion cable defective (e.g.
kinked).
– V-belt worn.
– Gearbox defective.
Remedy:
– Check cable adjustment. (
– Replace cable.
– Replace V-belt.
– Replace gearbox.
0478 111 9940 A - EN
Fault:
Vario drive speed control not functioning.
Possible cause:
– Vario drive lever moved in wrong
direction.
– Vario drive cable disengaged or
damaged (e.g. kinked).
12.6), Remedy:
– Move Vario drive lever in correct
direction. (
– Attach or replace Vario drive cable.
8.5), ( 11.3)
Fault:
Excessive vibration during operation
Possible cause:
– Blade fastening screw loose.
– Blade imbalance due to incorrect
sharpening or fracture.
– Cutting unit defective.
– Engine mounting loose.
Remedy:
– Tighten blade fastening screw. (
– Re-sharpen (balance) or replace blade.
( 12.5), (
– Check blade, blade shaft and blade
fastening and repair if necessary.
– Tighten engine mounting bolts.
12.7)
11.3)
12.4)
12.6),

20. Service schedule

20.1 Handover confirmation

20.2 Service confirmation

Please hand this instruction manual
to your STIHL specialist dealer in
the case of maintenance operations.
He will confirm the service operations
performed in the pre-printed boxes.
Service performed on
Next service date
32
59