Selecting Power Level; Mowing - Stihl FSA 130 R Notice D'emploi

11 Operating the Trimmer
If you are using a mowing head:
► Hold the trimmer with one hand on the control handle –
wrap your thumb around the control handle.
► Hold the trimmer with the other hand on the loop handle –
wrap your thumb around the loop handle.
If you are using a metal cutting attachment:
► Hold the trimmer with your right hand on the control
handle – wrap your thumb around the control handle.
► Hold the trimmer with the other hand on the loop handle –
wrap your thumb around the loop handle.

11.2 Selecting Power Level

One of three power levels can be selected to suit the
application. The LEDs indicate the selected power level. The
higher the power level, the faster the cutting attachment can
run.
The selected power level affects the battery's runtime. The
lower the power level, the longer the runtime.
0458-725-9921-A
1
► Push the release slide (1) in the direction of the loop
handle with your thumb and hold it there.
The LEDs indicate the selected power level.
► Push the release slide (1) forwards, hold it briefly in that
position and allow it to spring back.
This selects the next power level. Power level 3 is followed
by power level 1, then 2, 3, etc.
► Push the release slide (1) forwards and allow it to spring
back as many times as necessary to select the required
power level.

11.3 Mowing

The cutting height is determined by the distance of the
cutting attachment from the ground.
► Swing the trimmer back and forth in an arc (A).
► If you are using a metal cutting attachment: Mow with the
left-hand side on the metal cutting attachment (B).
English
A B
57