Adjusting Nylon Line; After Finishing Work; Transporting; Transporting The Trimmer - Stihl FSA 130 R Notice D'emploi

English
► Walk slowly and steadily forwards.

11.4 Adjusting Nylon Line

11.4.1 Line Feed on AutoCut Mowing Head
► Tap the rotating mowing head on the ground.
About 30 mm of fresh nylon line is advanced. The line
limiting blade in the deflector trims the mowing lines to the
correct length.
2 1
Automatic feed does not operate if the mowing lines are
shorter than 25 mm.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Depress the spool (1) on the mowing head and hold it
depressed.
► Pull out the mowing lines (2).
► If the mowing lines (2) cannot be pulled out to the required
length: Replace the spool (1) or the mowing lines (2).
The spool is empty.
11.4.2 Line Feed on SuperCut Mowing Head
Mowing lines are advanced automatically. The line limiting
blade in the deflector trims the mowing lines to the correct
length.
58
Automatic feed will not take place if the mowing lines are
shorter than 40 mm.
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Pull out the mowing lines.
► If the mowing lines cannot be pulled out to required length:
Replace nylon line.
The spool is empty.

12 After Finishing Work

12.1 After Finishing Work
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► If the trimmer is wet: Allow the trimmer to dry.
► Clean the trimmer.
► Clean the deflector.
► Clean the cutting attachment.
► If a metal cutting attachment is mounted: Fit the matching
transport guard.

13 Transporting

13.1 Transporting the Trimmer

► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► If a metal cutting attachment is mounted: Fit the matching
transport guard.
► Carry the trimmer properly balanced by the drive tube with
the cutting attachment behind you.
► Transporting the trimmer in a vehicle: Secure the trimmer
to prevent it turning over or shifting.
12 After Finishing Work
0458-725-9921-A