Testing The Trimmer; Checking The Controls; Operating The Trimmer; Holding And Controlling The Trimmer - Stihl FSA 130 R Notice D'emploi

English
► If the cutting attachment continues to rotate: Pull
connecting cable plug out of the socket and contact your
STIHL servicing dealer.
The trimmer has a malfunction.

10 Testing the Trimmer

10.1 Checking the Controls

Release slide, trigger lockout and trigger
► Pull the connecting cable plug out of the socket.
► Attempt to pull the trigger lever without depressing the
release slide and the trigger lockout.
► If the trigger can be pulled: Do not use your trimmer and
contact your STIHL dealer for assistance.
Release slide or trigger lockout is faulty.
► Push the release slide in the direction of the loop handle
and hold it there.
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger.
► Release the trigger and trigger lockout lever.
► If the trigger, trigger lockout or release slide is stiff or does
not spring back to the idle position: Do not use your
trimmer and contact your STIHL dealer for assistance.
The trigger, trigger lockout or release slide has a
malfunction.
Switching On
► Insert the connecting cable plug.
► Push the release slide in the direction of the loop handle
and hold it there.
► Depress the trigger lockout lever and hold it in that
position.
► Pull the trigger and hold it there.
The cutting attachment rotates.
56
► If 3 LEDs flash red: Pull connecting cable plug out of the
socket and contact your STIHL dealer for assistance.
There is a malfunction in the trimmer.
► Release the trigger and trigger lockout lever.
The cutting attachment comes to a standstill.
► If the cutting attachment continues to rotate: Pull
connecting cable plug out of the socket and contact your
STIHL dealer for assistance.
The trimmer has a malfunction.

11 Operating the Trimmer

11.1 Holding and Controlling the Trimmer

► Connect the carrying ring (2) to the carabiner (1).
10 Testing the Trimmer
1
2
0458-725-9921-A