Inserting And Removing Connecting Cable Plug; Inserting The Connecting Cable Plug; Removing The Connecting Cable Plug; Switching The Trimmer On/Off - Stihl FSA 130 R Notice D'emploi

8 Inserting and Removing Connecting Cable Plug

8 Inserting and Removing Connecting
Cable Plug
8.1

Inserting the Connecting Cable Plug

► Hold connecting cable plug (2) so that the arrow on its side
lines up with the arrow on the socket (1).
► Insert the connecting cable plug (2) in the socket (1).
The plug (2) engages in position.
8.2

Removing the Connecting Cable Plug

► Grip the connecting cable plug (2) with your hand.
► Pull the plug (2) out of the socket (1).
0458-725-9921-A
1
2
1
2

9 Switching the Trimmer On/Off

9.1

Switching On

► Hold the trimmer with your right hand on the control
handle – wrap your thumb around the control handle.
► Hold the trimmer with the other hand on the loop handle -
wrap your thumb around the loop handle.
1
3
► Push the release slide (1) in the direction of the loop
handle with your thumb and hold it there.
► Depress the trigger lockout (2) with your hand and hold it
there.
You can let go of the release slide (1).
► Pull the trigger (3) with your index finger and hold it there.
The motor accelerates and the cutting attachment rotates.
The speed of the cutting attachment is controlled by the
trigger (3).
The trimmer recognizes the cutting attachment being used
and adjusts the maximum speed automatically.
9.2

Switching Off

► Release the trigger and trigger lockout lever at the same
time.
► Wait for the cutting attachment to come to a standstill.
English
1
2
55