Adjusting Trimmer For User; Using With Stihl Ar Battery - Stihl FSA 130 R Notice D'emploi

English
6.6.2 Removing the Metal Cutting Attachment
► Switch off the trimmer and pull the connecting cable plug
out of the socket.
► Insert the stop pin in the bore as far as stop and hold it
depressed.
► Rotate the metal cutting attachment clockwise until the
stop pin engages in position.
The shaft is now blocked.
► Unscrew the mounting nut clockwise.
► Remove the rider plate, thrust washer, metal cutting
attachment and thrust plate.
► Remove stop pin.

7 Adjusting Trimmer for User

7.1

Using with STIHL AR Battery

7.1.1 Fitting and Adjusting the Connecting Cable
The connecting cable can be fitted and adjusted to suit the
user's size and the application.
1
2
2
2
The connecting cable can be secured in position by the
guide (1) on the harness and the fasteners (2), or on the side
of the backplate with the fasteners (2).
50
The length of the connecting cable can be adjusted by
making a loop on the backplate (3) or at one side (4).
► Arrange the connecting cable so that it is as short as
7.1.2
► Put the battery on your back.
2
2
2
► Close buckle (2) on the waist belt.
► Close buckle (1) on the chest strap.
3
possible without hindering your work.
Fitting and Adjusting the Carrying System
7 Adjusting Trimmer for User
4
1
0458-725-9921-A