Making Calls; Receiving Calls; Ending Calls - Sony MEX-BT5000 Mode D'emploi

Making calls

You can make a call from the connected cellular
phone by operating this unit.
1
Press (CALL).
The CALL menu appears.
2
Select the items in the following order,
then press the joystick to start calling.
CALL menu
Dialed Calls*
Selects from the dialed call history. (Maximum
storable name and phone numbers: 10)
Name and phone number to call c "Call"
Select "Delete" to delete the name and phone
number, "Delete All" to clear the history.
Received Calls*
Selects from the received call history.
(Maximum storable name and phone
numbers:10)
Name and phone number to call c "Call"
Select "Delete" to delete the name and phone
number, "Delete All" to clear the history.
Phonebook*
Selects from the phonebook list. (Maximum
storable name and phone numbers: 50)
"Contact List" c Name to call c the name and
phone number
For details on how to store in the phonebook,
see "Using the Phonebook" on page 18 and
"Setting a handsfree device" on page 19.
Dial
Inputs the phone number using the joystick or
card remote commander.
To input "+," press and hold the 0 button on the
card remote commander.
Preset Dial*
Selects the phone number stored in a number
button.
Preset number (P1 – P6) c "Call"
For details on how to store in the number
buttons, see "Using the Preset Dial" on page 18.
* If you set "Security" (page 19), "Security Locked"
appears and operation is not possible.
Tips
• Preset Dial also allows you to make a call by
pressing a number button twice after pressing
(CALL).
• On the "Dialed Calls," "Received Calls" and "Preset
Dial" menus, you can make a call by pressing
(CALL) while the phone number is displayed.
Presetting the volume of ring tone
and talker's voice
You can preset the volume level of the ring tone
and talker's voice.
To adjust the ring tone:
Rotate the joystick while the phone is ringing.
"Ring Vol" appears and ring tone volume is set.
To adjust the talker's voice:
Rotate the joystick during a call. "Talk Vol"
appears and the talker's voice volume is set.
Sending DTMF (Dual Tone Multiple
Frequency) tones
You can send DTMF tones.
To send DTMF tones, use the joystick or press
the required number buttons (0 – 9,
the card remote commander during a call.

Receiving calls

When receiving a call, ring tone is output from
your car speakers.
For details on the settings for receiving a call and
during a call, see "Setting a handsfree device" on
page 19.
1
When receiving a call, press (CALL),
(MENU) or (Bluetooth).
The phone call starts.
To reject a call
Press (OFF).
Tips
• If you set "Auto Answer" to on, the phone call is
automatically started in the set time (page 19).
• If (CALL) is pressed during a call, the handsfree
function is deactivated, and the microphone and
speaker of the cellular phone are activated. In this
case, the Bluetooth connection may become
disconnected depending on the cellular phone.

Ending calls

1
Press (OFF).
When the call ends, talk time appears for a
few seconds.
continue to next page t
or ) on
(Bluetooth)
(MENU)
(CALL)
17