Making A Personal Audio Emphasis File (Personal File); Switching The Speaker Formation (Sonic Formation) - Sony MHC-G99AV Mode D'emploi

Note
When you choose other sound effects, the
surround effects will be canceled. If you
want to memorize the effect, store it into a
personal file (see "Making a Personal
Audio Emphasis File (personal file)").
Making a Personal
Audio Emphasis File
(personal file)
You can create a personal file of audio
patterns (surround effect and graphic
equalizer) and store them in the memory of
the unit. Later call up an audio pattern to
play a favorite tape, CD, or radio program.
Create up to five audio files.
Before operation, first select the audio
emphasis you want for your basic sound.
POWER n ON
1
Obtain the sound effect you want by
using the graphic equalizer and
surround effect.
2
Press and hold down P FILE for more
than a second.
The personal file number appears in the
display.
CD
1 2 3 4 5
6 7 8
DOLBY NR OFF
63 125 250 500 1k 2k 4k
1DISC
CLIP
File number
3
Use the JOG dial to select the file
number (P FILE) where you want to
store the sound effect.
4
Press ENTER/NEXT.
The adjusted sound effects are stored
under the selected file number. The
settings previously stored at this
memory location are erased and
replaced by the new settings.
To call up the personal file
1 Press P FILE (or MUSIC MENU 4/$ on
the remote repeatedly until personal file
appears).
The last selected personal file appears in
the display.
2 Use the JOG dial (or press
MUSIC MENU "/" on the remote) to
select the personal file you desire.
3 Press ENTER/NEXT.*
* If you use the remote to select the effect in
step 2, skip step 3.
Switching the
Speaker Formation
(sonic formation)
In addition to the five-speaker system, you
can select the speaker formation from two
modes depending on your listening
situation.
WHISPER mode
2
The sound from the front speakers is cut off
and output from the rear speakers with its
sound decreased. For instance, when you
4
want to listen to the sound in bed, it is
suitable to set the rear speakers on either
side of the bed.
3
Front
speaker (L)
Rear
speaker (L)
LINK mode
The same sound is output from the front
VOLUME
speakers and rear speakers. For instance,
when you want to listen to the same sound
in two rooms, it is suitable to set the front
speakers and the rear speakers in each
room.
Front
speaker
(L)
Center Front
speaker (R)
speaker
Rear
speaker (R)
Front
Rear Rear
speaker
speaker speaker
(R)
(L) (R)
To select the formation mode
Press SONIC FORMATION repeatedly
until the mode you want appears in the
display.
As you press SONIC FORMATION, the
mode changes as follows:
WHISPER LINK NORMAL
To return to the normal mode
Press SONIC FORMATION repeatedly
until "NORMAL" appears in the display.
Note
When you turn on the Dolby Pro Logic
Surround, the sonic formation does not
function. If you turn on the Dolby Pro
Logic Surround in WHISPER or LINK
mode, the sonic formation is returned to
NORMAL automatically.
Chapter 5: Sound Adjustment
EN
21