Making A Personal Audio Emphasis File (Personal File) - Sony MHC-V700 Mode D'emploi

Making a Personal
Audio Emphasis File
(personal file)
You can create a personal file of audio
patterns (surround effect and graphic
equalizer) and store them in the memory of
the unit. Later call up an audio pattern to
play a favorite tape, CD, or radio program.
Create up to five audio files.
Before operation, first select the audio
emphasis you want for your basic sound.
POWER m ON
EN
26
1
Obtain the sound effect you want by
using the graphic equalizer and
surround effect.
2
Press and hold down P FILE for more
than a second.
The personal file number appears in the
display.
CD
63 125 250 500 1k
1DISC
3
Use the JOG dial to select the file
number (P FILE) where you want to
store the sound effect.
4
Press ENTER/NEXT.
The adjusted sound effects are stored
under the selected file number. The
settings previously stored at this
memory location are erased and
replaced by the new settings.
To call up the personal file
1 Press P FILE (or MUSIC MENU 4 /$ on
the remote repeatedly) to display the
last selected personal file.
2 Use the JOG dial (or press MUSIC
MENU " /" on the remote repeatedly)
to select the personal file you desire.
3 Press ENTER/NEXT.
You don't need to press ENTER/NEXT
when you use the remote.
Chapter 5: Sound Adjustment
4
2
3
VOLUME
DOLBY NR OFF
2k 4k 8k 16k(Hz)
File number