Connecting Optional Equipment - Sony MHC-V700 Mode D'emploi

Set the minutes in the same way. "OFF"
appears and the hour digits flash in the
display.
CD TIMER
1 2 3 4 5
6 7 8
DOLBY NR OFF
63 125 250 500 1k 2k 4k 8k 16k(Hz)
1DISC
flashing
.
CD TIMER
1 2 3 4 5
6 7 8
DOLBY NR OFF
63 125 250 500 1k 2k 4k 8k 16k(Hz)
1DISC
flashing
8
Use the JOG dial to set the hour you
want the system to turn off and press
ENTER/NEXT.
Set the minutes in the same way.
9
Press POWER to turn off the system.
The power will go on 15 seconds before
the preset time and the volume level is
automatically set to the minimum.
To change the preset timer settings
Start over from step 1.
To check the preset times settings
1 Press TIMER.
2 Press t SELECT and use the JOG dial to
select "REC".
3 Press ENTER/NEXT.
The preset items appear in the display
sequentially, then the original display
returns.
To cancel the timer
1 Press TIMER.
2 Press t SELECT and use the JOG dial to
choose "TIMER OFF."
3 Press ENTER/NEXT.
The timer indicators disappear from the
display.
If the power is on at the preset time
The sound source will automatically
change to the tuner, but tuner recording
will not start.
Notes
•You cannot set the timer so that the timer
ON and OFF times are the same.
•You cannot activate wake-up timer and
timer-recording at the same time.
•The timer operation starts 15 seconds
before the timer ON time, if you perform
another operation during that period, the
timer operation may not be performed
correctly.
Connecting Optional
Equipment
REC
VOLUME
For greater enjoyment of your stereo
system, you can connect other components
to the stereo. You can connect:
•a VCR
REC •an MD recorder
VOLUME
•a turntable
•a super woofer
•headphones
Connecting a VCR
By connecting the audio outputs terminals
from your VCR to the AUDIO IN terminals
on the rear of the stereo system you can
enjoy your videos in powerful stereo
sound. Make sure you connect the plugs to
jacks of the same color.
By connecting the AUDIO OUT and VIDEO
(or S VIDEO) OUT terminals to the input
terminals on your VCR, you can record the
audio and video signals from VIDEO CD
and CD-G on video tape. See the operating
instructions supplied with your video deck
for details.
rear panel
Connect
AUDIO LINE OUT
jacks of the VCR
AUDIO LINE IN
jacks of the VCR
VIDEO LINE IN
jack of the VCR
S VIDEO LINE IN
jack of the VCR
To listen to sound from the VCR
Press FUNCTION repeatedly to select
"VIDEO".
If you cannot select "VIDEO" by pressing
FUNCTION
Select "MD" and turn the power off. Then,
press POWER while holding down
FUNCTION.
"MD" will be switched to "VIDEO".
To return to "MD", repeat this procedure.
Connecting an MD or DAT
Deck
You can record from the various sound
sources of the stereo system to an MD or
DAT deck in analog sound. Make sure you
connect the plugs to jacks of the same color.
You can listen to the sound from the MD
deck by pressing FUNCTION repeatedly to
select MD.
rear panel
VCR
Connect
LINE OUT jacks of
the MD or DAT
deck
LINE IN jacks of
the MD or DAT
deck
To listen to sound from the MD or
DAT deck
Press FUNCTION repeatedly to select
With
"MD".
AUDIO IN jacks
(using an audio cord)
If you cannot select "MD" by pressing
(not supplied)
FUNCTION
Select "VIDEO" and turn the power off.
AUDIO OUT jacks
Then, press POWER while holding down
(using an audio cord)
FUNCTION.
(not supplied)
"VIDEO" will be switched to "MD".
VIDEO OUT jack
To return to "VIDEO", repeat this
(using a supplied
procedure.
video cord)
S VIDEO OUT jack
Note
(using an S VIDEO
You cannot record the sound effects created
cord) (not supplied)
by "music menu", "DBFB", or "GROOVE"
with analog recording from the AUDIO
OUT jacks. However, you can record the
sound created by "KARAOKE PON/MPX"
and "surround effect".
MD or
DAT deck
With
AUDIO IN jacks
(using an audio cord)
(not supplied)
AUDIO OUT jacks
(using an audio cord)
(not supplied)
Chapter 7: Additional Features
EN
31