SilverCrest RHYTHM GO Instructions D'utilisation Et Consignes De Sécurité page 38

NOTE: When you change the volume on the product
the volume on the playback device will also so change. This
volume synchronisation function depends on the operating
system and the brand of your playback device.
˜ True Wireless Stereo TWS pairing
NOTE: This function is only available when the two
speakers are identical (same model number).
Turn on both speakers and make sure they are both
not connected to another device via Bluetooth
moment, neither of the speakers is actively coupled with
a playback device.
Press the
then by default set it as the "primary" unit. A beep will
sound. When pairing between both products has been
carried out successfully, the LED
"secondary" unit stops flashing and a sequence of
beeps will sound.
Press the
connection, the LED
unit flashes and a signal tone sequence sounds.
NOTE: The product which had its
first will become the "primary" unit (in the left audio
channel), and the other unit will then by default becone the
"secondary" unit (in the right audio channnel).
˜ PartyPlay function
PartyPlay is a new feature that allows you to connect more
than 2 speakers together and up to a total of 10 speakers to
play music at the same time.
NOTE: Only SilverCrest branded Bluetooth speakers
with this PartyPlay function can work together.
NOTE: The product which had its PartyPlay
pressed first will become the "primary" unit and the
[ 8 ]
other unit will then by default become the "secondary"
or "additional" unit. The playback device can only be
controlled with the primary device.
To enjoy the Partyplay function, you can connect more
Partyplay compatible products together and up to 10
speakers can be connected together by using the Partyplay
button
8 ] [
36 GB/IE
button on one of the products which will
7 ] [
button again to break the TWS pairing
7 ] [
on the connected "secondary"
5 ] [
.
of the connected
5 ] [
button
7 ] [
. At this
®
pressed
button