Chassis Assembly - iKarus ECOPiccoloV2 Notice De Montage

Chassis Assembly

Now use one drop of CA glue to stick the canopy
68245
mount # 67380 to the middle of the main frame #
67380 68245. Now the skid landing gear is clipped toge-
ther. Now clip the skids # 67465 into the front and
rear skid brackets # 67464 as shown in the drawing.
The front part of the skid landing gear is now pushed
2.
into the slot in the chassis until it clicks in. Then the
3.
rear skid brackets, whereby care must be taken that
the small lugs on the front click into the slots.
2.
67464
1.
1.
67465
Push the main gear wheel # 67372 onto the main ro-
67571
tor shaft # 67382 and use pliers to push the retaining
67385
pin # 67399 through the holes in the gear and shaft.
Push the two bearings # 67571 into the housing,
push the rotor shaft through them and retain from
above using the rubber grommet # 67385.
67382
67372
67399
15