Pre-Operational Checks (Daily Checks) - Kubota KC70 Manuel De L'opérateur

49
7.

PRE-OPERATIONAL CHECKS (DAILY CHECKS)

In order to prevent occurrence of troubles and accidents, the operator must know the condition of the machine at all times.
The pre-operational checks must be daily performed before start of the work.
1. Defect found on the day before
2. Check around the machine for oil, water leakage.
3. Check for loose bolts, nuts missing of pins.
4. Check fuel level.
5. Check engine oil, and replenish
6. Check transmission oil, and replenish
7. Check hydraulic pump oil, and replenish
8. Apply grease or oil to each part.
9. Check and adjust belt tension
10. Check crawler tension.
11. Check battery liquid level.
12. Check brake lever stroke.
13. Check horn.
14. Check for burning-out, shorting, loose terminals of electric wiring.
15. Clean the wiring and engine.
16. Check labels
Items
Engine
Rubber house
Transmission
Hydraulic pump
Hydraulic cylinder
Hydraulic valve
Hydraulic hose joint
Lower rollers
Engine set bolts
Others.
1. Cylinder lower
2. Cylinder upper
3. Lower roller
4. Upper roller
5. Idler
6. Bogie roller
7. Wire (Clutch, accelerator etc)
8. Steering lever
9. Clutch lever
10. Parking brake lever
11. Accelerator lever
12. Guide, lift arm
13. Main clutch tension arm
14. Shaft, filft arm
15. Shaft, bucket
16. Other moving parts
1. Transmission drive belt
2. Hydraulic pump drive belt
Remarks & Ref. pages
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
If impossible, ask
the specified service
plant.
Tighten up.
Page 61
Page 65
Page 69
Page 71
Page 79
Page 91
Page 93
Page 73
Page 87
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -