Publicité
Les langues disponibles
Les langues disponibles
Work as follows:
a.
Apply adhesive tape (A) to have refer-
ences to the hooking points of the unit
(fig. 22b).
The tape can be removed once the unit
has been hooked to the wall.
b.
Raise the air conditioner holding it by
the sides of the lower base and hook
it to the brackets (L) (fig. 23).
Slightly tilt the lower part of the ap-
pliance towards yourself to ease the
operation.
• To make the electrical connection and
fasten the drainpipe, place a wedge be-
tween the air conditioner and the wall
(see fig. 24).
• When you have finished, inspect carefully
to make sure there are no fissures at the
back of the air conditioner (the insulating
gasket must fit firmly against the wall)
particularly in the zone where air enters
and leaves the machine.
EN - 24
23
L
22b
A
A
L
1015mm
24
A
A
A
180mm
540
mm
~41 kg
Publicité
