Publicité
Les langues disponibles
Les langues disponibles
Fitting the saw blades:
D
F
G
Let the machine run for a short period of time and in a safe position. If
the machine does not run easily, stop working immediately.
Regularly check the saw blade fixing screws.
Use only original accessory!
Care and Maintenance
Before the beginning of maintenance or repair works you
have to disconnect the plug from the mains.
Repairs may be executed only by appropriately qualified and experienced
personnel. After every repair the machine has to be inspected by an electric
specialist. Due to its design, the machine needs a minimum of care and
maintenance. However, the following points always have to be observed:
Whenever working on the machine, always mount the saw blade
guard on the saw blades.
Always keep the power tool and the ventilation slots clean.
Clean the sword, the saw blade guide and the saw blades after
finishing the work.
Insert both saw blades separately from the
front into the groove of the sword (D), until
both lugs on the saw blades engage the
recesses on the sword (E).
E
B
Insert the rear ends of the saw blades into the
housing, until the threaded holes are in the
correct position (F).
Tighten both saw blade fixing screws securely
by pressing and turning simultaneously with
the short end of the Allen key SW 5 (G).
19
Publicité
