Publicité
Les langues disponibles
Les langues disponibles
Do not use the sword to pry away sawn off wood pieces, etc.
After finishing the working procedure, switch the power tool off.
Mount the saw blade guard onto the saw blades.
Regularly check the saw blade fixing screws.
Tool change
Attention!
Before any work on the tool, disconnect the plug from the mains!
Attention!
Wear protective gloves when mounting the saw blades. Danger of
injury when touching the saw blades.
Removing the saw blades:
A
B
C
Place the tool upside down on a flat, stable
work surface.
Loosen both saw blade fixing screws with the
Allen key SW 5 (A).
Lift the saw blades separately up from the holder
on the housing (B) and pull them from the sword
(C).
18
Publicité
