Transporting; Loading And Unloading - Honda FRC800 Manuel Du Propriétaire

TRANSPORTING

Follow Honda's recommendations for safe loading, unloading, and
transporting your tiller.
BEFORE LOADING
If the engine has been running, allow it to cool for at least 15 minutes
before loading the tiller on the transport vehicle. A hot engine and exhaust
system can burn you and can ignite some materials.
Always turn the ignition switch to the OFF position. Make sure to turn the
fuel valve OFF.

LOADING AND UNLOADING

If a suitable loading ramp is not available, two people should lift the tiller
on and off the transport vehicle while holding the tiller level.
Position the tiller so it sits flat on the bed of the transport vehicle. Tie the
tiller down with rope or straps. Keep the tie-down rope or straps away
from the controls, adjustment levers, cables, and the carburetor.
60