Tine Replacement - Honda FRC800 Manuel Du Propriétaire

7.Use a brush to remove carbon deposits from the spark arrester
screen. Be careful to avoid damaging the screen.
The spark arrester must be free of breaks and holes. Replace the
spark arrester if it is damaged.
8.Install the spark arrester, muffler protector, and muffler deflector in
the reverse order of disassembly.
9.Install the air filter elements (see page 38).

TINE REPLACEMENT

Use Honda Genuine replacement tines or their equivalent. Wear heavy
gloves to protect your hands.
Nut and bolt positions
Tighten the bolts from outside in.
Make sure to install the tine plates.
10 mm NUTS/
10 mm SPRING WASHERS
SERVICING YOUR TILLER
SPARK ARRESTER SCREEN
TINE PLATES
10 mm BOLTS
Tine positions
Rotary tines C/D and C'/D':
Toward outside.
Others: Toward inside.
A C E
B D F
A' C' E'
B' D' F'
51