Drive Belt Adjustment - Honda FRC800 Manuel Du Propriétaire

SERVICING YOUR TILLER

DRIVE BELT ADJUSTMENT

1.Stop the engine, and remove the spark plug cap.
2.Adjust the handlebar height to the third hole from the bottom (see
page 23).
3.Adjust the clutch cable (see page 42).
Remove the belt cover. Hold the clutch lever in the ENGAGED
position. Pinch the upper and lower parts of the belt together with
both hands five or six times.
Belt tension is correct when the distance from the top of the belt to
the top of the tension roller is 1 3/4—2 in (45—50 mm) when the
clutch is engaged.
44
1 3/4 -2 in (45 - 50 mm)