Initial Startup: Coupling The Scanner And Control Panel - eKey TOCAhome Mode D'emploi

Operation
PROGRAM, MENU FUNCTIONS AND DISPLAY
Normal operation
Enrol user
Delete user
Set security code
Reset to initial settings
(deletes all user settings and data)
4.2. INITIAL STARTUP:
COUPLING THE SCANNER AND CONTROL PANEL
When the devices are initially connected to the power supply, the display of the scanner
panel begins counting backwards until connection has been established with the control
panel. Two red dots are then displayed. During this time the LED light remains red. After
the initial process is completed, the LED light begins to blink orange. The device can now
be initialised.
Press the OK button and then the
Enrol Finger. Now the inger already recorded can be drawn across the sensor to start the
initialisation process without losing any data (important after the scanner panel has been
replaced). If no ingers have been recorded to date (new installation), press the
terminate the initialisation process.
The initialisation process is fully automated. The devices are automatically coupled with each
other to prevent unauthorised replacement of the control panel or unauthorised access. The
blinking decimal point in the scanner panel signals normal operation after the initialisation
process has completed. The security code is set to a default value of 99. Please change this
value as soon as possible to a security code of your own choice.
20
(blinking dot)
ESC button. EF appears on the display, which stands for
.
Eu
du
Sc
rr
ESC key to