Installation; Electrical Connection - eKey TOCAhome Mode D'emploi

Installation

3. INSTALLATION
3.1. WALL MOUNTING OF THE SCANNER PANEL
Mount the mounting plate (see Figure in Section 1) directly on the
wall. The optimum
The skew of the housing is optimally adapted to this mounting height.
A lush-mounted installation can only be carried out with the accessory
"stainless steel set for lush-mounted installation." In order to guaran-
tee optimum operation of the external unit with both hands, the unit
should be mounted at a certain distance from other objects.
Use the round plastic cover accessory for lush-mounted installations
(for example in a 1-gang wallbox). The panel can also be mounted
directly on the wall with plugs, wood screws or the like (see list of ac-
cessories). The control panel (spraywater-proof) is to be mounted in a
location that is protected from heavy rain and snow showers and must
be protected from intense sunshine.
3.2. WALL MOUNTING OF THE CONTROL PANEL
First mount the mounting plate located on the back side of the scanner panel.
The mounting plate serves as a base for the housing of the scanner panel. Now connect the
scanner panel on the mounting plate.
Open the scanner panel by pushing the lap closure downwards with a lat screwdriver.
Mount the scanner panel so that it is protected from unwanted access.
pulation!
ATTENTION:
The internal unit must be installed exclusively by a professional technician.
3.3. ELECTRICAL CONNECTION (SEE FIGURE 3)
The scanner panel must be supplied with electrical power. The supply voltage for the unit is
9VAC (alternating voltage). For this purpose please use the "9VAC – in" connecting terminals
and use only the provided energy supply plug. The use of a bell transformer will destroy the
device. This will result in a loss of warranty.
18
mounting height is at least 135 cm.
180 cm 135 cm
or higher
Danger of mani-