Model Description - Hatco Flav-R 2-Go Manuel D'installation Et D'utilisation

MODEL DESCRIPTION

All Models
Hatco Flav-R 2-Go Pizza Locker Systems are designed to
® ®
hold pick-up and delivery orders securely while allowing quick
access. Each unit features magnetically-locked hinged doors
on the customer side and non-locked doors on the operator
side, a 10" (254 mm) touchscreen controller on both sides of
the unit, a Power I/O (on/off) switch, and a 6' (1829 mm) power
cord with plug.
Pizza lockers systems can be installed on a countertop,
mounted to the floor, or built into a wall opening. All units are
available in several Designer colors.
The touchscreen controller can be used to input customer orders
manually or used with an outside vendor's POS integration. Each
locker can be set to HEATED or AMBIENT mode.
NOTE: Refer to the OPTIONS AND ACCESSORIES section of
this manual for all of the available options and accessories.
F2GP-21, F2GP-22, and F2GP-12 Models
(Countertop Models)
The F2GP-21, F2GP-22, and F2GP-12 models are designed
for countertop use. These models are 2 or 4 lockers high with
1 or 2 columns.
Power Cord
w/Plug
Touchscreen
Controller
Operator Side Shown
Countertop Models (Model F2GP-22-C shown)
Power I/O Switch
F2GP-14 Model (Floor Mount Model)
The F2GP-14 model is designed to be installed onto the floor.
This model is 8 lockers high with 1 column.
Power I/O
Switch
Touchscreen
Controller
Operator Side
Shown
Power Cord w/Plug
Floor Models (Model F2GP-14-C shown)
F2GBP-12, F2GBP-14, F2GBP-21, and
F2GBP-22 Models (Built-In Models)
The F2GBP-12, F2GBP-14, F2GBP-21, and F2GBP-22 models
are designed to be installed into a wall opening. These models
are 2 to 8 lockers high with 1 to 2 columns.
Power Cord
w/Plug
Operator Side Shown
Built-In Models (Model F2GBP-22-C shown)
4
English
Power I/O Switch
Touchscreen
Controller
Form No. F2GPM-0721