Basic Operation - Hitachi CP-S225W Manuel D'utilisation

O P E R A T I O
O P E R A T I

Basic Operation

The basic operations shown in Table 3 is performed from the supplied remote controller or the
projector control panel. Items indicated by (*) may be used from the control panel.
Table 3 . Basic Operation
Item
Select Input Signal (
RGB→ VIDEO → S-VIDEO → COMPONENT (→ RGB)
Select RGB Input : Press the RGB button.
VIDEO/S-VIDEO/COMPONENT → RGB
INPUT
Select Video Input : Press the VIDEO button.
SELECT
RGB → VIDEO/S-VIDEO/COMPONENT
VIDEO → S-VIDEO → COMPONENT (→ VIDEO)
• The selected signal name is displayed for approximately 3 seconds when the input
signal is changed.
Set/Clear Position Adjustment Mode :
Press the POSITION button.
Image Position Adjustment:
POSITION
Press the
• Valid only in the MAGNIFY mode with a video signal is input.
• After approximately 10 seconds of inactivity the [
POSITION mode is cleared automatically.
Initialize Each Item : Select an item and press the RESET button.
Initialize Position Adjustment : Press the RESET button and the
*)
RESET (
POSITION mode. This function is valid only when RGB signal is input.
• Valid except for the VOLUME, LANGUAGE, H PHASE and WIHSPER.
Set MAGNIFY Mode : Press the MAGNIFY
Move Magnified Area : Run the POSITION in the MAGNIFY mode.
Adjust Magnification :
Press the MAGNIFY
MAGNIFY
MAGNIFY
Clear MAGNIFY Mode : Press the MAGNIFY
• The MAGNIFY mode is cleared by running or setting the AUTO, ASPECT, INPUT
SELECT or VIDEO, or by changing the input signal.
Set/Clear FREEZE Mode : Press the FREEZE button. The [II] icon is
displayed, and the image frozen, in the FREEZE mode.
• The FREEZE mode is cleared by running or setting POSITION, VOLUME, MUTE,
FREEZE
Automatic Adjustment, BLANK ON/OFF, or MENU ON/OFF, or by changing the
input signal.
• Do not forget to clear frozen static images.
Set/Clear KEYSTONE Mode : Press the KEYSTONE
KEYSTONE
Adjust Keystone : Press the
*)
(
reduces the bottom size of image ↔
NOTE
• Use the remote controller at a distance of approximately 3m from the sensor on the front
of the projector, and within a range of 30° left-right. Strong light and obstacles will interfere with
operation of the remote controller.
N S ( c o n
O N S ( c o n
Description
*)
: Press the INPUT button.
The [
, , and buttons in the POSITION mode.
/ button in MAGNIFY mode.
magnifies the image ↔ MAGNIFY
/
t i n u e d )
t i n u e d )
] icon is displayed in the POSITION mode.
] icon is extinguished and the
button.
reduces the image
button.
OFF
button.
button in the KEYSTONE mode.
reduces the top size of image
(It continue the next page.)
ENGLISH-9