Using The Timers; Setting The Sleep Timer; To Cancel The Sleep Timer; Setting The Play Timer - Sony CMT-SBT20 Mode D'emploi

Using the timers

The system offers Sleep Timer and Play
Timer.
Note
• The Sleep Timer has priority over the Play Timer.

Setting the Sleep Timer

At the specified time, the system is turned
off automatically.
1
Press SLEEP  repeatedly to
select the specified time.
You can select from "SLEEP 90" (90
minutes) to "SLEEP 10" (10 minutes), or
"AUTO." Each time you press the button,
the Sleep Timer decreases by 10
minutes. If you select "AUTO," the
system turns off automatically after a
CD or USB device playback ends, or
within 100 minutes.
Tip
• To check the remaining time of Sleep Timer, press
SLEEP  again.
• The Sleep Timer works even if the clock is not set.

To cancel the Sleep Timer

Press SLEEP  repeatedly to select "OFF."

Setting the Play Timer

You can listen to a CD, USB device or radio at
a preset time.
Note
• Make sure you have set the clock before setting
the timer (page 9).
1
Prepare the sound source, and
then press VOLUME +/–  to
adjust the volume.
26
GB
2
Press TIMER MENU  to enter
the timer set mode.
3
Press  /   to select "PLAY SET,"
 .
then press
"ON TIME" appears, and then the hour
indicator flashes on the display .
4
Press  /   to set the hour, then
 .
press
The minute indicator flashes on the
display .
5
Press  /   to set the minutes,
 .
then press
"OFF TIME" appears, and then the hour
indicator flashes on the display .
Follow the same procedure to set the
hour and minutes for stop time of the
Play Timer.
6
Press  /   to select the desired
sound source, then press
The confirmation display for the Play
Timer appears.
7
Press /  to turn off the
system.
Tip
• When the sound source is a radio, make sure to
tune in to the radio station before turning off the
system (page 14).
• To change the timer setting, perform the
procedures from the beginning again.
• The Play Timer setting remains as long as the
setting is not cancelled manually.
 .