Connecting Your Network; Connecting To A Wi-Fi Network; Connecting To A Wired Network; Option 3: Wi-Fi Connection Using - Sony RDP-XA900iPN Mode D'emploi

Connecting Your Network

See the following descriptions to determine the correct way to set up.

Connecting to a Wi-Fi network

Option 1: Wi-Fi Connection using
WPS Push Button Configuration
Method
Setup device: Wireless LAN router/access
point
Refer to A in the supplied "AirPlay via Wi-Fi
Network Setup" for details.
Option 2: Wi-Fi Connection using
D-Sappli*
Setup device: iPad/iPhone/iPod touch
Refer to B in the supplied "AirPlay via Wi-Fi
Network Setup" for details.
* For details on D-Sappli, see page 16.

Option 3: Wi-Fi Connection using

Access Point Scan (page 12)
Setup device: Mac or PC

Connecting to a wired network

Option 4: Wired Connection
Connect the unit and a wireless LAN router/
access point by network (LAN) cable (not
supplied). Then turn this unit on.
The LINK indicator lights up amber when the
connection is established (about 90 seconds
later).
11
GB