Specifications - Sony RDP-XA900iPN Mode D'emploi

Specifications

AUDIO POWER
SPECIFICATIONS
POWER OUTPUT AND TOTAL
HARMONIC DISTORTION:
Power Output (reference)
Tweeter 25 W + 25 W (at 10% harmonic
Woofer 25 W + 25 W (at 10% harmonic
Subwoofer 50 W + 50 W (at 10% harmonic
Section for iPod
DC out: 5 V
MAX: 2.1 A
Section for Wireless LAN
Compatible standards
IEEE 802.11 b/g
(WEP 64 bit, WEP 128 bit,
Radio frequency
2.412 GHz – 2.472 GHz
(2.4 GHz ISM Band, 13 Channels)
Channel 1 – Channel 13
Section for Bluetooth
Output
Bluetooth Specification Power Class 2
Maximum communication range
Line of sight Approx. 10 m*
Radio frequency
2.4 GHz band (2.4000 GHz – 2.4835 GHz)
Communication System
Bluetooth Specification Version 2.1 + EDR
26
GB
distortion)
distortion)
distortion)
WPA/WPA2-PSK (AES),
WPA/WPA2-PSK (TKIP))
1
(Enhanced Data Rate)
Compatible Bluetooth Profiles*
A2DP (Advanced Audio Distribution Profile)
3
AVRCP* (Audio Video Remote Control
Supported codec
SBC (Subband Codec)
Copy Management
SCMS-T
1
* The actual range will vary depending on
factors such as obstacles between devices,
magnetic fields around a microwave oven,
static electricity, reception sensitivity, aerial's
performance, operating system, software
application, etc.
2
* Bluetooth standard profiles indicate the
purpose of Bluetooth communication between
devices.
3
* Some operations may not be available due to
different iPod models.
4
* Codec: Audio signal compression and
conversion format
General
Speakers
Tweeter Approx. 20 mm diameter × 2
Woofer Approx. 70 mm diameter × 2
Subwoofer Approx. 135 mm diameter × 1
AUDIO IN
ANALOG φ 3.5 mm stereo mini jack
DIGITAL Optical
Network port
10BASE-T/100BASE-TX (Auto Polarity)
Power requirements
230 V AC, 50 Hz
Dimensions (w/h/d) (including
projecting parts and controls)
Approx. 600 mm × 200 mm × 201 mm
Mass
Approx. 7.1 kg
2
Profile)
*4