Pairing With A Device That Does Not Have An Nfc Function - Sony CMT-SBT20 Mode D'emploi

Pairing with a device that
does not have an NFC
function
Keep the BLUETOOTH device and the
system within 1 meter of each other for this
operation.
1
Press BLUETOOTH  .
If there is no pairing information in the
system, such as when using a
BLUETOOTH device for the first time
after purchasing the system, the system
will automatically switch to pairing
mode.
"PAIRING" flashes on the display  and
(BLUETOOTH) indicator  flashes
the
quickly.
2
Turn on (activate) the BLUETOOTH
function on the BLUETOOTH
device.
For details, refer to the operating
instructions supplied with the
BLUETOOTH device.
A list of the devices found may appear
on the BLUETOOTH device display.
20
GB
3
Select [CMT-SBT20] (this system).
If you are prompted to enter a passkey,
enter "0000." If the system does not
show up on the list of devices, start over
from step 1 again.
When pairing is completed, "BT AUDIO"
will appear on the display  and the
(BLUETOOTH) indicator  will stop
flashing.
4
Press   .
Starts playback.
Using the buttons on the system or the
remote control, you can control play/
pause (/  ) and previous/next
(/  ). Stopping playback and
other operations can be controlled
using the BLUETOOTH device.
5
Press VOLUME +/–  to adjust
the volume.
Listening to music on a paired
device
Press BLUETOOTH  .
The last connected device will be connected
automatically. If the connection cannot be
established, make sure that the BLUETOOTH
function on the BLUETOOTH device is activated,
and then select the system ("CMT-SBT20") to start
the connection process.
To cancel pairing
Press BLUETOOTH MENU  , BLUETOOTH 
or change the source.
Terminating a BLUETOOTH
connection
1
Press BLUETOOTH MENU  .
2
Press /  to select "DISCONNECT ,"
 .
then press