General Safety Instructions - Dräger FG7500 Notice D'utilisation

Short Operating Instructions

General safety instructions

Any use of the Dräger FG7500 requires full understanding and compliance with the operating
instructions 5695092, the relevant standards, as well as the relevant statutory regulations.
The device is intended only for the uses described in the manual 5695092.
It is not suitable for use as a continuously operating gas warning and alarm device.
Don't use the device in explosive areas.
Any improper use of the device may lead to electric shock or destruction of the measuring
instru-ment!
Before using the measuring device for the first time, the integrity of all components must be
checked, e.g.:
Device exhibits no visible damage

No condensed water in the gas preconditioner

The gas preconditioner filter is clean

Gas hoses without defects

Visual inspection of the probe

Always fully charge the Dräger FG7500 via the USB interface with a 5 V DC / 1 A USB power
sup-ply adapter only. We recommend monthly recharging in the event of longer periods of non-
use. Incomplete charging affects the charging capacity of the battery in the long term.
Operating Instructions and managing PC measuring data
The operating instructions 5695092 can be found on our website www.draeger-msi.de under
the menu item Services → Downloads → FG7500 → Operating Instructions. Under the menu
item Services → Down-loads → FG7500 → Software you can find the measurement data
management PC200P, which is down-loadable after a short registration with device serial
number and your address data.
EU-wide regulations apply to the disposal of electrical and electronic equipment. Please note
local regula-tions for disposal or return the device to Dräger MSI or your national retailer for
disposal. Damaged batter-ies are hazardous waste and have to be disposed at an intended
hazardous waste site.
Switching on: Press the ON/OFF button briefly. The device switches on. Please select your
language when you switch on the device for the first time.
Switching off: Press the OFF button in the main menu or press the ON/OFF button . If a
program is in use, the ON/OFF button returns to the main menu.
Make sure that the gas outlet at the bottom is unobstructed and not closed or blocked.
FG7500 7