Description Of The Manual - Volpi OLYTECH mondial 755SP Manuel D'utilisation Et De Maintenance

ENGLISH
1. INTRODUCTION
Dear Customer, many thanks for your decision to buy the olive picking equipment Olytech, manufactured
by our company. This equipment has been specifically designed to let olives, nuts, coffee beans drop into
a net, facilitating the collection of those and other types of fruits. As applicable to all other products
manufactured by us, this machine has been strongly tested to assure the right quality and performance.
You can also count on a continuous after sales assistance provided by Volpi maintenance shops which
have all the necessary spare parts.
2.

DESCRIPTION OF THE MANUAL

This instruction manual follows the requirements of the original Annex Nr.1 of the Machineries Directive
2006/42/CE of the European Community following additions and modifications. This manual has to be
considered part of the equipment and must be kept in a clean place for easy and continuous
consultation; it will follow the equipment from day one up to the nd until the final garbage disposal.
This instruction manual has the following objectives:
• Describe the functioning and the correct utilisation of the machine.
• Show the most important features of the machine.
• Instruct the owner on how to use it.
• Warn on possible hazard, and dangers.
• Instruct on how to maintain and repair the machine.
• Provide the list of spare parts available.
In addition to the specifications of this manual, all the existing safety laws and practices
have to be followed.
3. ASSEMBLING
Codes 755SP-L-XL 845SP-L-XL 855SP-L-XL 865SP-L-XL Ref. fig. B
Hold the head of the machine -T- and position the head support -A- close to the standard pole as
indicated in this picture. Join the connector in the pole -M- with the connector on the head -B- pushing
up to the end to be sure to have electrical connection. Insert the pole in the head support and introduce
it into the pole. Push straight the pole into the head support and fix it by screwing the four nut -C- and
insure a firm hold of the pole into the head support.
The pole can be fix or telescopic. In order to extend or shorten the telescopic pole, use the lock N. Open
the lever P, set the desired length, up to the maximum length, and lock again the lever P. If the pole is
not correctly locked, re-open the lever P, slightly tighten the screw Q and lock the lever.
4. STARTING UP
Codes 755SP-L-XL Ref. fig. C.1
Link the connector positioned at the bottom of the pole -D- to the connector -E- positioned at the end of
the extension cable -S- and screw it.
Connect the clamps F of the cable S to the 12V battery: red clamp to the positive terminal (+), black
clamp to the negative terminal (-).
The battery, not provided, must never be connected to the battery charger while used.
Press the Z button on the handle in order to switch the machine on. The red led on the handle lights up
and stays on until the machine is turned off.
COMPANY WITH QUALITY SYSTEM
MANAGEMENT CERTIFIED BY ICIM
Tel. +39 0376 76009 Fax +39 0376 76408 www.volpioriginale.it
= ISO 9001 =
Davide e Luigi Volpi S.p.A.
Via San Rocco, 10 – 46040 Casalromano (MN) – Italia
Translation of the original instructions
38