Input Menu - Fracarro SIG7330 Instructions D'emploi

INPUT
TS INPUT
Preset selection PRESET
Set Remote Power for LNB
Set the DiSEqC tone
DiSEqC
Reading the frequency of the
local oscillator
IF frequency of the trasponder to
be received
Symbol rate of the trasponder to
be received
FEC of the trasponder to be
received
List of available programs
SERVICE PROPR.
Confirm the settings by pressing
the key; save the settings by
pressing the S key after the
modules programmation.

5.2.3 INPUT MENU

ENABLED
OFF
LNB OFF
A D
FREQ.OL (MHz) AUTO
FREQ.IF (MHz) 950
SYMBOL RATE 2000
Read only
FEC AUTO
1/N
SERVICE LIST
PROGRAM 1
PROGRAM NAME
SERVICE ID
PCR PID
VIDEO PID
AUDIO PID
TELETEXT PID
SUBTITLES
SERVICE TYPE
VIDEO FORMAT
AUDIO TYPE IN
Enable/disable the
Transport Stream input
DISABLED
from the back panel
PRESET 1 PRESET 15
Enter with
Enter with
LOAD PRESET
Loading...
SAVE PRESET
OFF
14V/0KHz
18V/22KHz 18V/0KHz
14V/22KHz
18V/22KHz
satellite A
satellite B
satellite C
satellite D
Read only
Increase/decrease by TPE arrows or enter the value
2150
directly by the digit keyboard
Increase/decrease by TPE arrows or enter the value
40000
directly by the digit keyboard
N/N
PROGRAM N
Name of the selected program
ID Service of the selected
program
PCR PID of the selected
program
VIDEO PID of the selected
program
AUDIO PID of the selected
program
TELETEXT PID of the
selected program
SUBTITLES of the selected
program
Type of the selected
program
Video program of the
selected program
Audio type of the selected
program
22
The upload and save
preset functions allow
the memorization of
the following input
parameters: remote
power supply, DiSEqC
tone, IF freq. ,
Symbol rate, and
displayed channel but
the output parameters
are not memorized.
"Not available": trasponder not locked
"NONE": ID service not present
Increase/decrease by TPE
arrows or enter the value
directly by the digit
keyboard
Increase/decrease by TPE
arrows or enter the value
directly by the digit
keyboard
Increase/decrease by
TPE arrows
none
ita
eng
deu
...