Input Menu - Fracarro KDSR Instructions D'emploi

Preset selection
INPUT
PRESET
Set Remote Power for LNB
LNB
Set the DiSEqC tone
DiSEqC
Reading the frequency of the
FREQ.OL (MHz)
local oscillator
IF frequency of the trasponder to
FREQ.IF (MHz)
be received
Symbol rate of the trasponder to
SYMBOL RATE
be received
FEC of the trasponder to be
received
List of available programs SERVICE LIST
SERVICE PROPR.
Confirm the settings by
pressing the key; save the
settings by pressing the S key
after the modules
programmation.

5.2 INPUT MENU

OFF
LOAD PRESET
OFF 18V/22KHz
A D
AUTO
950
2000
Read only
FEC AUTO
1/N
PROGRAM 1
PROGRAM NAME
SERVICE ID
PCR PID
VIDEO PID
AUDIO PID
TELETEXT PID
SUBTITLES
SERVICE TYPE
VIDEO FORMAT
AUDIO TYPE IN
14
PRESET 1 PRESET 15
Enter with
Enter with
Loading...
SAVE PRESET
OFF
14V/0KHz
18V/0KHz
14V/22KHz
18V/22KHz
satellite A
satellite B
satellite C
satellite D
Read only
Increase/decrease by TPE arrows or enter the value
2150
directly by the digit keyboard
Increase/decrease by TPE arrows or enter the value
40000
directly by the digit keyboard
N/N
PROGRAM N
Name of the selected program
ID Service of the selected
program
PCR PID of the selected
program
VIDEO PID of the selected
program
AUDIO PID of the selected
program
TELETEXT PID of the
selected program
SUBTITLES of the selected
program
Type of the selected
program
Video program of the
selected program
Audio type of the selected
program
The upload and save
preset functions allow
the memorization of the
following input
parameters: LNB,
DiSEqC tone, IF freq.,
Symbol rate, displayed
channel, service ID and
subtitles. The
memorized output
parameters are video
format and audio type.
"Not available": trasponder not locked
"NONE": ID service not present
Increase/decrease by TPE
arrows or enter the value
directly by the digit
keyboard
Increase/decrease by TPE
arrows or enter the value
directly by the digit
keyboard
Increase/decrease by
TPE arrows
none
ita
eng
deu
...