Clearing Faults - EHEIM Incpiria 230 Mode D'emploi

English
Laying on the cover (⌦J)
The cover j is narrower in width than the cover k.
1. Lay the cover j in the lower sliding surface of the cover frame.
2. Lay the cover k in the upper sliding surface of the cover frame.
Opening/closing the cover
CAUTION! Material damage.
Condensation can form on the underside of the covers.
▶ Only open the covers by pushing them sideways or folding them back to the side.
▶ Before removing the covers, allow the condensation to drip into the aquarium.
Switching the cabinet lighting on and off
1. Switch the cabinet lighting on or off with the remote control. Please observe the cabinet lighting's
operating manual.
8. Maintenance
DANGER! Electrocution!
▶ All devices must be disconnected from the power supply before any maintenance work is carried
out.
CAUTION! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
▶ The appliance components are not dishwasher-proof. Do not clean the appliance or appliance parts
in the dishwasher.
The following sections describe maintenance work necessary for optimum and fault-free operation.
Regular maintenance prolongs the service life and assures functionality of the appliance over a long
period.
1. Regularly remove lime scale deposits from the furniture, the glass and the LED light with a soft,
damp cloth.
2. Regularly clean the sliding surfaces of the covers j and k.
9.

Clearing faults

DANGER! Electrocution!
▶ All devices must be disconnected from the power supply before clearing faults.
The LED light cannot be repaired. A defective appliance must be completely replaced.
18