Festo DNCI−32 Notice D'utilisation page 21

DNCI−...
4 Conditions of use
Please note
Special conditions apply to the electronic control of the DNCI−...:
S Take into account the relevant instructions in the manuals for the controllers
of type SPC... .
Please note
Malfunctioning will occur if the device is not used correctly.
S Make sure that the specifications in this chapter are always observed.
Only in this way can you ensure correct and reliable functioning.
Compare the maximum values specified in these operating instructions with
S
your actual application (e.g. pressures, forces, torques, temperatures, masses,
speeds, voltages).
Only if the loading limits are observed can the DCNI−... be operated in
accordance with the relevant safety guidelines.
Observe the specifications applicable to your location, as well as all local and
S
national laws and regulations.
Remove the packing except for the adhesive labels on the compressed air
S
connections (to prevent dirt).
The packing is intended for recycling (except for oiled paper which must be
disposed of ).
Observe the ambient conditions at your location.
S
Festo DNCI−... 0610a English
21