Safety Information; Proper Use; Technical Data - EINHELL BG-CH 18 Li Mode D'emploi D'origine

Anleitung_BG_CH_18_Li_SPK7:_
Important!
When using equipment, a few safety precautions
must be observed to avoid injuries and damage.
Please read the complete operating manual with due
care. Keep this manual in a safe place, so that the
information is available at all times. If you give the
equipment to any other person, give them these
operating instructions as well.
We accept no liability for damage or accidents which
arise due to non-observance of these instructions
and the safety information.

1. Safety information

Please refer to the booklet included in delivery for the
safety instructions.
CAUTION!
Read all safety regulations and instructions.
Any errors made in following the safety regulations
and instructions may result in an electric shock, fire
and/or serious injury.
Keep all safety regulations and instructions in a
safe place for future use.
Explanation of the warning signs on the machine
(Figure 3)
1. Warning!
2. Do not expose the hedge trimmer to rain or wet
conditions!
3. Read the instructions for use before use!
4. Wear eye protection and ear plugs!
5. If the cable is damaged or cut, pull out the power
plug from the mains immediately.
2. Layout (Fig. 1/2)
1. Cutter rail
2. Hand guard
3. Steady grip with button switch
4. Handle with button switch
5. Battery charger
6. Battery pack
7. Cutter guard
8. Impact guard
9. Lock for steady grip
10. Lock for handle
11. Lock for battery
12. Screw for steady grip
13. Screws for hand guard
14. Philips head screwdriver
08.09.2011 14:29 Uhr Seite 9

3. Proper use

This hedge trimmer is suitable for cutting hedges,
bushes and shrubs.
The machine is to be used only for its prescribed
purpose. Any other use is deemed to be a case of
misuse. The user / operator and not the
manufacturer will be liable for any damage or injuries
of any kind caused as a result of this.
Please note that our equipment has not been
designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Cutter rail length
Cutting length
Tooth spacing
Cutting thickness max.
Cuts/min
Charging time
Sound pressure level, L
Sound power level, L
Vibration a
hv
Weight
Battery pack
Voltage
Capacity
Battery charger
Mains voltage
Output voltage/current
GB
580 mm
508 mm
14 mm
11 mm
2200
3-5 h
63,4 dB
pA
83,4 dB
WA
≤ 2.5 m/s²
3.3 kg
18 V d. c.
1,3 Ah
230 V ~ 50 Hz
21 V d. c. / 500 mA
9