Setting The Dynamic Soundstage Organizer; Dso; Additional Information; Maintenance - Sony CDX-MP40 Mode D'emploi

Masquer les pouces Voir aussi pour CDX-MP40:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Setting the Dynamic
Soundstage Organizer (DSO)
If your speakers are installed into the lower part
of the doors, the sound will come from below
and may not be clear.
The DSO (Dynamic Soundstage Organizer)
function creates a more ambient sound as if there
were speakers above the dashboard (virtual
speakers).
You can store the DSO setting for each source.
DSO mode and image of virtual speakers
*3
*2
*1
*4

*1 DSO-1

*2 DSO-2
*3 DSO-3
*4 DSO-OFF
1
Press (SOURCE) to select a source
(radio, CD or MD).
2
Press (DSO) repeatedly until the
desired DSO setting appears.
Each time you press (DSO), the DSO setting
changes.
To cancel the DSO function, select "OFF."
After 3 seconds, the display returns to normal
play mode.
Notes
• Depending on the type of car interior or type of
music, DSO may not have a desirable affect.
• If FM broadcasts are difficult to hear, set DSO to off.
*3
*2
*1
*4

Additional Information

Maintenance

Fuse replacement
When replacing the fuse, be sure to use one
matching the amperage rating stated on the
original fuse. If the fuse blows, check the power
connection and replace the fuse. If the fuse blows
again after replacement, there may be an internal
malfunction. In such a case, consult your nearest
Sony dealer.
Warning
Never use a fuse with an amperage rating
exceeding the one supplied with the unit as this
could damage the unit.
continue to next page t
Fuse (10 A)
21

Publicité

Chapitres

Table des Matières
loading

Table des Matières